Vertex Standard VX-8R ユーザーズマニュアル
VX-8R O
PERATING
M
ANUAL
28
A
DVANCED
O
PERATION
A
UDIO
M
UTING
The Audio Mute feature is useful in situations where it would be helpful to reduce the
audio level of the “Receive Only” band (Small character display) whenever you receive a
signal on the “Main” band (Large character display) during Dual Receive operation.
audio level of the “Receive Only” band (Small character display) whenever you receive a
signal on the “Main” band (Large character display) during Dual Receive operation.
To activate the Audio Mute feature:
1. Press and hold the
key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 62: MUTE
62: MUTE
62: MUTE
62: MUTE
62: MUTE
.
3. Press the
key briefly to enable selection of this Set Mode
Item.
4. Rotate the DIAL knob to select the desired muting level
(MUTE 30%
MUTE 30%
MUTE 30%
MUTE 30%
MUTE 30%
, MUTE 50%
MUTE 50%
MUTE 50%
MUTE 50%
MUTE 50%
, MUTE 100%
MUTE 100%
MUTE 100%
MUTE 100%
MUTE 100%
, or OFF
OFF
OFF
OFF
OFF
).
5. When you have made your choice, press the PTT switch to
save the new setting and return to normal operation.
When the Audio Mute feature is activated, the “ ” icon will
appear on the display, and the “ ” icon blinks while muting the
“Receive Only” band audio.
appear on the display, and the “ ” icon blinks while muting the
“Receive Only” band audio.
K
EYPAD
/LCD I
LLUMINATION
Your VX-8R includes a reddish illumination lamp which aids in nighttime operation. The
red illumination yields clear viewing of the display in a dark environment, with minimal
degradation of your night vision. Three options for activating the lamp are provided:
red illumination yields clear viewing of the display in a dark environment, with minimal
degradation of your night vision. Three options for activating the lamp are provided:
KEY 2sec
KEY 2sec
KEY 2sec
KEY 2sec
KEY 2sec
- KEY 10sec
KEY 10sec
KEY 10sec
KEY 10sec
KEY 10sec
: Illuminates the Keypad/LCD for the selected illumination
time when any key is pressed.
CONTINUOUS
CONTINUOUS
CONTINUOUS
CONTINUOUS
CONTINUOUS
:
Illuminates the Keypad/LCD continuously.
OFF
OFF
OFF
OFF
OFF
:
Disables the Keypad/LCD lamp.
Here is the procedure for setting up the Lamp mode:
1. Press and hold the
key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 46: LAMP
46: LAMP
46: LAMP
46: LAMP
46: LAMP
.
3. Press the
key briefly to enable selection of this Set Mode
Item.
4. Rotate the DIAL knob to select one of the three modes de-
scribed above.
5. When you have made your choice, press the PTT switch to
save the new setting and return to normal operation.