Vertex Standard VX-8R ユーザーズマニュアル

 (R

)

 (“O

”)

All memories can store an independent transmit frequency, for operation on repeaters
with non-standard shift. To do this:

1. Store the receive frequency using the method already described under M

 (it doesn’t matter if a repeater offset is active).

2. Tune to the desired transmit frequency, then press and hold in the 

 key for 1/2

second.

3. Within five seconds of releasing the 

 key, rotate the DIAL knob to select the same

memory channel number as used in step “1” above.

4. Press and hold in the PTT switch, then briefly press the 

 key once more while

holding the PTT switch in (this does not key the transmitter).

1. While operating in the VFO mode, press the 

 key to

enter the Memory mode.

2. Rotate the DIAL knob to select the desired channel.
3. If you press the 

 key briefly, then rotate the DIAL knob,

the memory channel will be selected in 10 channels per step.

4. To return to the VFO mode, press the 

 key.

 Æ 

 Æ 

2) You may change the step of the fast channel selection mode (

 key + DIAL knob)