Vertex Standard VX-8R ユーザーズマニュアル

 (D

)

The VX-8R’s scanning features include a two-channel scanning capability which allows
you to operate on a VFO or Memory channel, while periodically checking a user-defined
Memory Channel for activity. If a station is received on the Memory Channel which is
strong enough to open the Squelch, the scanner will pause on that station in accordance
with the Scan-Resume mode set via Menu Item 83: SCAN RESUME

83: SCAN RESUME

83: SCAN RESUME

83: SCAN RESUME

83: SCAN RESUME

. See page 60.

Here is the procedure for activating Priority Channel Dual Watch operation:
1. Press the 

 key briefly to enter the Memory Recall (“MR”) mode, if you are not

using memories already.

2. Press and hold in the 

 key for one second, then rotate the DIAL knob to select the

memory channel you wish to be the “Priority” channel.

3. Press the 

 key. The “P

P

P

P

P

” icon will appear to the right of

the “MR

MR

MR

MR

MR

” label, indicating it is the Priority channel.

4. Now set the VX-8R for operation on another memory chan-

nel, or on a VFO frequency.

5. Press and hold in the 

 key for one second. The display

will remain on the VFO or memory channel selected. How-
ever, every five seconds the VX-8R will check the Priority
Channel for activity. The “MR

MR

MR

MR

MR

” label will be replaced by

“MDW

MDW

MDW

MDW

MDW

” while operating on the Memory channel or the “VFO

VFO

VFO

VFO

VFO

” label will be replaced

by “VDW

VDW

VDW

VDW

VDW

” while operating on the VFO mode.

6. If a station appears on the Priority Channel, the radio will pause on that channel, as

described previously.

The receiving time interval (ratio) between the current channel (or VFO frequency) and
Priority channel may be customized via Set Mode Item 72: PRI TIME

72: PRI TIME

72: PRI TIME

72: PRI TIME

72: PRI TIME

.

To set the receiving time interval:
1. Press and hold the 

 key for one second to enter the Set Mode.

2. Rotate the DIAL knob to select Set Mode Item 72: PRI TIME

72: PRI TIME

72: PRI TIME

72: PRI TIME

72: PRI TIME

.

3. Press the 

 key briefly to enable adjustment of this Set

Mode Item.

4. Rotate the DIAL knob to select the desired time interval.

Available selections are 0.1sec

0.1sec

0.1sec

0.1sec

0.1sec

 - 0.9sec

0.9sec

0.9sec

0.9sec

0.9sec

 (0.1sec/step) and

1.0sec

1.0sec

1.0sec

1.0sec

1.0sec

 - 10.0sec

10.0sec

10.0sec

10.0sec

10.0sec

 (0.5sec/step).

5. Press the PTT switch briefly to save the new setting and

exit to normal operation.