Vertex Standard VX-8R ユーザーズマニュアル

Installation of the optional BU-1 Bluetooth

 Adapter Unit will enable, the VX-8R to

send/receive voice messages with the optional BH-1 or BH-2 Bluetooth

 Headset via

wireless links.

When using the Bluetooth

 Headset for the first time, the Bluetooth

 Headset and the

VX-8R must be paired.

1. Make sure that the VX-8R and BH-1 (or BH-2) are both off.
2. Press and hold in the 

 (PWR) switch for 2 seconds to turn the VX-8R on.

3. Press and hold the 

 key for one second to enter the Set Mode.

4. Rotate the DIAL knob to select Set Mode Item 16:

16:

16:

16:

16:

BLUETOOTH P-CODE

BLUETOOTH P-CODE

BLUETOOTH P-CODE

BLUETOOTH P-CODE

BLUETOOTH P-CODE

.

5. Press the 

 key briefly to enable selection of this Set Mode

Item.

6. The default PIN code (6111

6111

6111

6111

6111

) will appear.

You may change the PIN code, if desired, before continu-
ing with step 7.
1) Press the 

 key to enable changing of the PIN code.

2) Rotate the DIAL knob to set the first digit of the PIN code.
3) Press the 

 key to save the first digit of the PIN code and move on to the next

place.

4) Repeat the previous steps to complete the PIN code. If you make a mistake, press

the 

 key to move back to the incorrect number, then re-enter the correct

number.

7. Bring the BH-1 (or BH-2) close to the VX-8R, then press and hold in the POWER

switch of the BH-1 (or BH-2) until the LED indicator blinks red/blue alternately
(approximately five seconds).

8. Press the 

 key to initiate the pairing.

9. If the pairing is successful (requires about 20 to 30 seconds), “ ” icon will appear on

the display of the VX-8R and the LED indicator of the BH-1 (or BH-2) will blink
blue.

10. Press the PTT switch of the VX-8R to save the new setting and return to normal

operation.