Vertex Standard VX-8R ユーザーズマニュアル

selected resister.

7. Rotate the DIAL knob (or press the keyboard) to select the

first character of the comment.

8. Press the 

 key to move to the next character.

9. Repeat steps 6 and 7 to program the remainder of the comment.
10. If you make a mistake, press the 

 key to back-space the cursor, then re-enter the

correct character.

11. You may add/delete a character to a comment using the following technique.

1) If you want to clear any previous comments, press the 

/

 key to select the

“ALL CLEAR

ALL CLEAR

ALL CLEAR

ALL CLEAR

ALL CLEAR

” then press the 

 key.

2) If you want to delete a previously-stored comment after the cursor, press the 

/

 key to select “CLEAR

CLEAR

CLEAR

CLEAR

CLEAR

” then press the 

 key.

3) If you want to add a character, press the 

/

 key to select “INSERT

INSERT

INSERT

INSERT

INSERT

” then

press the 

 key.

12. When you have completed your entry, press the PTT switch to save the new setting

and exit to the STATION LIST screen.

The VX-8R allows you to set up to eight digipeaters for the APRS Packet Path.

The VX-8R is preset to WIDE1-1 and WIDE2-1 digi-path to insure that your transmitted
APRS Beacon is received over wide area. We recommend that you use this setting by
default.

1. Press the 

 key several times until the STATION LIST

screen appears on the display.

2. Press and hold the 

 key for one second to enter the APRS/

GPS Set Mode.

3. Rotate the DIAL knob to select Set Mode Item 15: DIGI

15: DIGI

15: DIGI

15: DIGI

15: DIGI

PATH

PATH

PATH

PATH

PATH

.

4. Press the 

 key briefly to enable adjustment of this Set

Mode Item.

5. Rotate the DIAL knob to select the Pass Number (1

1

1

1

1

 - 8

8

8

8

8

)

you wish to set

6. Press the 

 key briefly to begin callsign entry into the

selected path.

7. Rotate the DIAL knob (or press the keyboard) to select the first character of the callsign

(with SSID) of the digipeater.

8. Press the 

 key to move to the next character.

9. Repeats steps 7 and 8 to program the remainder of the callsign.