Vertex Standard VM-3500E ユーザーズマニュアル
VM-3500E
Page 30
8.15 INTERCOM OPERATION
If the RAM+ Mic is connected to the VM-3500E, you may communicate be-
tween the VM-3500E and RAM+ Mic.
tween the VM-3500E and RAM+ Mic.
8.15.1 Communication
1. Press the [F] key followed by the [5(IC)] key, the mode is changed to “IN-
TERCOM” mode.
2. When the “INTERCOM” operation is activated, “
In-
tercom
” is displayed on the VM-3500E, and “IC” is
displayed on the RAM+ Mic.
3. Press the PTT switch. “
Talk
” will be shown on the
display.
NOTE: A warning beep will be emitted
when the VM-3500E microphone’s
PTT switch is pressed while the RAM+
Mic’s PTT switch is pressed.
NOTE: A warning beep will be emitted
when the VM-3500E microphone’s
PTT switch is pressed while the RAM+
Mic’s PTT switch is pressed.
4. Speak slowly and clearly into the mi-
crophone, hold the microphone about
1/2 inch away from your mouth.
1/2 inch away from your mouth.
5. When finished, release the PTT switch.
6. To exit the “INTERCOM” mode and
6. To exit the “INTERCOM” mode and
return to radio operation mode, press the [F] key followed by the [5(IC)] key
again.
again.
8.15.2 Calling
Press and hold the [5(IC)] key for 1 second when the “INTERCOM” operation is
activated, a calling beep is emitted twice from the transceiver speaker.
activated, a calling beep is emitted twice from the transceiver speaker.
(RAM+ Mic’s PTT switch is pressed)
(VM-3500E’s PTT switch is pressed)