Vertex Standard VM-3500E ユーザーズマニュアル
Page 59
VM-3500E
11.4 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “9 DIGI-
TAL SELECTIVE CALLING” and section “10 RADIO SETUP” for details). The
TAL SELECTIVE CALLING” and section “10 RADIO SETUP” for details). The
LAMP
,
CONTRAST
, and
KEY BEEP
menu item accessed from the RAM+ only
controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [CALL/SET] key until “
1. Press and hold down the [CALL/SET] key until “
RADIO SETUP
” menu ap-
pears.
2. Press the [
]/[] key to select “
RADIO SETUP
” or “
DSC SETUP
” menu.
3. Press the [CALL/SET] key, then select the menu item you wish to work on
by pressing the [
]/[] key.
4. Press the [CALL/SET] key.
5. Press the [
5. Press the [
]/[] key to change the value or condition for the menu item,
then press the [CALL/SET] key to save the new setting.
6. Press the [
]/[] key to select “
EXIT
,” then press the [CALL/SET] key to
return to the normal operation.
RADIO SETUP-menu
DSC SETUP-menu