Vertex Standard VXA-700 ユーザーズマニュアル

Similar to Dual Watch operation (described on previous
page), Priority Dual Watch is an enhanced version which
includes the following additional features:

¦ The receiving time interval (ratio) between the cur-

rent channel and the Priority channel may be custom-
ized via the Menu Item “PRI Time.” See page 54 for
details.

¦ Irrespective of which channel is currently being re-

ceived, when the PTT button is pushed transmission
will always occur on the Priority channel.

Before initiating Priority Dual Watch, Menu Item “DW/
PRI” must be set to the “PRI” mode (instead of “DW”).
See page 54 for details.

r To start Priority Dual Watch, press 

 

Ò 

. The

“DW” icon will appear on the display.

r While receiving on the “current” (non-Priority) chan-

nel, pressing the PTT button once causes the radio to
switch to the Priority channel and cancels Dual Watch.
Press the PTT button again to transmit on the Priority
channel.

r When a signal is received on the Priority channel, re-

ception immediately shifts to the Priority channel; the
“DW” icon will blink, and the display will become
illuminated unless the Scan Lamp Feature is turned
off.

r While receiving on the Priority channel, if you mo-

mentarily press the PTT switch, Priority Dual Watch
will be disabled. You may then transmit on the Prior-
ity Channel.

r To stop Priority Dual Watch, press 

 

Ò 

.