Vertex Standard VXA-700 ユーザーズマニュアル

 (A

)

Repeater stations, usually located on mountaintops or other
high locations, provide a dramatic extension of the com-
munication range for land-based low-powered hand-held
or mobile transceivers. The VXA-700 includes a number
of features which make repeater operation simple and en-
joyable.

Repeater Shifts
Your VXA-700 has been configured, at the factory, with
the repeater shift set to 600 kHz on the 2-m amateur band.

Depending on the part of the band in which you are oper-
ating, the repeater shift may be either downward (–) or
upward (+), and one of these icons will appear at the bot-
tom of the LCD when repeater shifts have been enabled.

Automatic Repeater Shift (ARS)
The VXA-700 provides a convenient Automatic Repeater
Shift feature, which causes the appropriate repeater shift
to be automatically applied whenever you tune into the
designated repeater sub-bands in your country. These sub-
bands are shown at the right.

If the ARS feature does not appear to be working, you
may have accidentally disabled it.

To re-enable ARS:
r Press the 

 key, then press the 

 key to activate

the Menu (“SET”) mode.

r Rotate the DIAL selector knob to select Menu Item

“4. Transmit,” then press the 

 key..

r Rotate the DIAL selector knob to select Sub Menu

Item “3. ARS,” then press the 

] key..

r Press the 

 key again to enable adjustment of this

Menu Item.

r Rotate the DIAL selector knob to select “ON” (to en-

able Automatic Repeater Shift).

r When you have made your selection, press the 

key to save the new setting, then press the PTT key
repetitively until the radio exits to normal operation.

European Version

Version A

145.1

145.5

145.6 145.8

146.0

146.4

147.0

147.6

148.0

146.6

147.4

ARS-Repeater Subbands