Canon 2232B001AA ユーザーズマニュアル

Loading Paper

Or

ig

inals and P

rin

t M
edia

■ To print on the back side of preprinted 

paper

① Load the preprinted paper face up into the 

stack bypass tray, as shown in the 
illustration below.

The screen for selecting the paper size appears.

When loading paper into the stack bypass tray, 
align the paper stack neatly between the slide 
guides. If the paper is not loaded correctly, a 
paper jam may occur.
If you are printing on heavyweight paper or 
envelopes using the stack bypass tray, and find 
that the paper or envelopes are not being fed 
smoothly or evenly through the stack bypass 
tray, remove the paper or envelopes, curl the 
feeding edges upward approximately 1/8" 
(3 mm), and then reload the paper or 
envelopes. Curling the feeding edges enables 
the rollers to grip the paper or envelopes as 
they are fed into the machine from the stack 
bypass tray.

If there are instructions on the paper package 
about which side of the paper to load, follow 
those instructions.
When the paper is loaded into the stack bypass 
tray, the side facing down is the one printed on.
If problems, such as poor print quality or paper 
jams occur, try turning the paper stack over 
and reload it.

–

–

–

–

–