Furuno 511 ユーザーズマニュアル
6. MAINTENANCE & TROUBLESHOOTING
6-6
SYSTEM DATA
You can confirm the current equipment and drive system status.
1. Press the [TURN/MENU] key twice to show the menu.
2. Rotate the course control knob to select “SYSTEM DATA”.
3. Press the course control knob to show the system data screen.
1. Press the [TURN/MENU] key twice to show the menu.
2. Rotate the course control knob to select “SYSTEM DATA”.
3. Press the course control knob to show the system data screen.
INPUT VOLTAGE:
24.4 V
CONTROLLER ID:
1
DRIVE TYPE:
SOLENOID
BYPASS/CLUTCH:
NON
FET TEMP.:
24.6 F
MOTOR DRIVE CUR.:
0.0 A
BYPASS/CLUTCH CUR.:
0.0 A
SYSTEM DATA
ID: 1
System data screen
6.4 Clearing
Memories
Memories can be cleared to restore the Navpilot-511/520/611 to default settings.
For details, see the installation manual.
For details, see the installation manual.