HP (Hewlett-Packard) 179776-002 ユーザーズマニュアル

ページ / 143
5-13
Compaq ProLiant 3000 Servers Setup and Installation Guide
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart   Project: Compaq ProLiant 3000 Servers Setup and Installation Guide   Comments: 179776-002
File Name: F-CH05.DOC   Last Saved On: 1/5/99 11:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Configuring PCI Boards
Automatically
The system ROM automatically configures PCI boards. If a user selection is
required, a POST message directs you to run the System Configuration Utility.
Also, you may use the System Configuration Utility to change the default
automatic settings.
Removing Boards
System ROM automatically reconfigures the server after a PCI board or DIMM
is removed.
Installing an Operating System
Compaq ProLiant 3000 servers support the following operating systems:
■ 
Novell NetWare 3.2, NetWare 4.2, NetWare 4.2 SMP, and NetWare 5
■ 
Novell NetWare For Small Business 4.2
■ 
Microsoft Windows NT 3.51 and 4.x
■ 
SCO OpenServer 5.xx and 5.xx with SMP
■ 
SCO UnixWare 2.1.x OSMP, and UnixWare 7.0.x OSMP
■ 
SCO UnixWare 2.1.x, and UnixWare 7
■ 
IBM OS/2 2.x SMP 2.11, Warp 3.x, Warp 4.0, Warp Server 4.0, Warp
Server Advanced 4.0, and Warp Server Advanced 4.0 with SMP
■ 
Banyan VINES 6.x, 7.X and 8.x
■ 
Sun Solaris x86 2.5, 2.51, and 2.6
When you select the Operating System Installation feature from the System
Configuration Utility main menu, the utility provides prompts to simplify the
installation.