DELL E23S Series ユーザーズマニュアル

Menu Item

Description

Add Boot Option

Adds a new boot option.

Delete Boot Option

Deletes an existing boot option.

Boot From File

Sets a one-time boot option not included in the boot option list.

Embedded System Management

The Dell Lifecycle Controller provides advanced embedded systems management throughout the server’s lifecycle. The 
Lifecycle Controller can be started during the boot sequence and can function independently of the operating system.

NOTE: Certain platform configurations may not support the full set of features provided by the Lifecycle Controller.

For more information about setting up the Lifecycle Controller, configuring hardware and firmware, and deploying the 
operating system, see the Lifecycle Controller documentation at dell.com/support/manuals.

iDRAC Settings Utility

The iDRAC Settings utility is an interface to set up and configure the iDRAC parameters using UEFI. You can enable or 
disable various iDRAC parameters using the iDRAC Settings Utility.

NOTE: Accessing some of the features on the iDRAC Settings Utility requires the iDRAC7 Enterprise License 
upgrade.

For more information on using iDRAC, see the

 iDRAC7 User's Guide

 at dell.com/esmmanuals.

Entering The iDRAC Settings Utility

1.

Turn on or restart the managed system.

2.

Press <F2> during Power-on Self-test (POST).

3.

In the System Setup Main Menu page, click iDRAC Settings.
The iDRAC Settings screen is displayed.

Changing The Thermal Settings

The iDRAC Settings utility enables you to select and customize the thermal control settings for your system.

1.

Enter the iDRAC Settings utility.

2.

Under iDRAC Settings → Thermal → User Option, select between the following options:

•

Default

•

Maximum Exhaust Temperature

•

Fan Speed Offset

NOTE: When the User Option is set to the default Auto setting, the user option cannot be modified.

3.

Set the Maximum Air Exhaust Temperature or the Fan Speed Offset fields.

4.

Click Back → Finish → Yes.

32