Polycom 1500/1800/2000/4000 ユーザーズマニュアル

 

Ultra Secure Mode

Polycom®, Inc. 

862

In compliance with UC APL requirements for enhanced security of wireless local area networks that follow 
the IEEE 802.11 standard, support for 802.1X Authentication has been included in this version.

802.1X Authentication requires that the RMX registers with a 802.1X Authentication Server and is supported 
on RMX 1500/2000/4000 The authentication protocol is applied to each the following Network Interface 
Controllers (NICs):

● Management
● Signaling
● Media

The following 802.1X Authentication methods are supported:

● EAP-MD5
● EAP-TLS
● PEAPv0
● MSCHAPv2

Implementation of 802.1X Authentication requires a certificate, which is obtained from the Certificate 
Repository.

● Either one TLS certificate is retrieved for all IP services and their associated NICs, 



If one certificate is retrieved for all NICs, the RMX will use the Management Certificate for all the 

NICs.

or

●  A TLS certificate for each IP service and their associated NICs is retrieved from the Certificate 

Repository:


If several different TLS certificates are retrieved, each NIC will use the certificate of the service 

that it is associated with.


In a system configured with Multiple Network Services each IP service will use its own 

certificate.



A NIC that does not have its own certificate will first attempt to use the Management Certificate 

before using a self-signed certificate.

For RMX 2000, Network Separation must be implemented before configuring 802.1X Authentication.
802.1X Authentication is not supported in Microsoft environments.