Belkin 8000I ユーザーズマニュアル

 

 

79

Northstar 8000i System - 12" Display Processor Installation Manual 

 To add a new instrument: 

1. Select 

 then select 

. If you can't see the 

 button, 

select 

. 

2. Choose 

then select the instrument panel that you want to change 

and select 

.  

3. Select 

 then select 

t. The Select Data Channel box is 

displayed.  

4. The 

 button shows the current setting. If it's On, the 8000i shows 

the data channels that are currently receiving that data. (If it's Off, the 8000i shows 
all the data channels that are available.) Select the button to toggle the Active 
Channels button 

, if necessary.  

5. Select 

next to the data channel that is most appropriate for the instrument that 

you're adding (for example, if you're adding a water temperature sensor, select + 
Environment). The 8000i lists the instrument data available from that data channel. 

6.  Select the instrument data that you want to show, then choose 

. 

7.  The new instrument is shown immediately on the selected Instruments screen in 

the top left corner. 

8.  You can select the new instrument and drag it to a new location on the instrument 

panel. The yellow lines help you to align the new instrument with the existing 
instruments. 

9.  When you are finished, select 

  

10. If you want to add another new instrument, select 

 and repeat the 

procedure. Otherwise, select 

. 

 

You can use this to change the size of an instrument displayed on an instrument panel. The 
instrument can be set to small, medium, or large. 

The default size is medium. 

 To resize an instrument: 

1. Select 

 then select 

. If you can't see the 

 button, 

select 

. 

2. Choose 

then select the instrument panel that you want to change 

and select 

.  

3. Select 

 from the control panel then select the instrument to be resized. 

4. The 

 button shows the current setting. Select the button if you 

want to change the setting and a drop down list of choices appears.   

5.  Select the new setting then select 

 to confirm. 

6.   The new setting is applied immediately and stays until you change it again. 
7.  When you are finished, select 

. 

 

You can use this to change the name of an instrument panel. 

 To rename an instrument panel: 

1. Select 

, then 

.  

2. Choose 

then 

 

 then 

 to display the Rename 

Panel box. 

3.  Select the instrument panel that you want to rename. 
4. Select 

 then enter the new name using the onscreen keyboard.  

5. Select 

 to confirm the new name. 

6.  When you are finished, select 

.