Furuno 1763c ユーザーズマニュアル
1. OPERATIONAL OVERVIEW
1-6
1.2
Inserting a Chart Card
Your unit reads FURUNO and Nav-Charts
™ (NAVIONICS), or C-MAP chart
cards, depending on its specifications. Insert the appropriate chart card for your
area as follows:
1. Open the chart card slot lid.
area as follows:
1. Open the chart card slot lid.
Chart slot
Display unit
2. Insert desired chart card groove side up.
3. Close the lid to protect the chart drive.
3. Close the lid to protect the chart drive.
Note 1
: Do not insert or remove the chart card while turning power on. This may
cause the equipment to freeze.
Note 2
: Do not remove a card while the chart is being drawn. This may cause
the equipment to freeze.
Note 3
: A card remover is supplied to ease removal of chart cards. Attach the
card remover to the right-hand side hole on the card and pull to remove
card. You can leave the card remover attached to the card while the
card is in the card slot - push the card remover leftward until it contacts
the recessed area in the card.
card. You can leave the card remover attached to the card while the
card is in the card slot - push the card remover leftward until it contacts
the recessed area in the card.
Note 4
: For multiple display units, do not use the same chart card type in more
than one display unit.
Chart card and card remover