Furuno 1763c ユーザーズマニュアル

6. DATA TRANSFER

6-5

6.2

Uploading, Downloading Data

You can upload waypoint and route data from a PC and download like data to a
PC, through the DATA 3 port at the rear of the display unit. Note that sounder
and radar data cannot be uploaded or downloaded.

6.2.1

Setting communication software on the PC

Set communication software on the PC as follows:

Baud Rate:

4800 bps

Character Length: 8 bits
Stop bit:

1 bit

Parity: None
X Control:

XON/XOFF (fixed)

The following data can be downloaded/uploaded between a personal computer
and this equipment:

•

Waypoint data (In alphanumeric order)

•

Route data (In order of route number)

Note 1: There are two kinds of data for route data: route data and route

comment data.

Note 2: Wiring information appears on the UPLOAD or DOWNLOAD menu.

6.2.2

Uploading or downloading data

1.  Connect the PC to the equipment.
2.  Press the [MENU] key to show the main menu.
3.  Press the SYSTEM CONFIGURATION soft key.
4.  Press the DATA TRANSFER soft key.
5.  Press the UPLOAD/DOWNLOAD DATA soft key.
6.  Press the DOWNLOAD WPT/RTE DATA TO PC or UPLOAD WPT/RTE

DATA FROM PC soft key.

WAYPOINT & ROUTES

OFF

MARKS & LINES

OFF

▲

UPLOAD

EDIT

UPLOAD

SELECT
BPS

RETURN

WIRING INFORMATION
DISPLAY UNIT PC: DSUB9
TxD >1>-WHITE-<2<RD
RxD >2>-BLUE -<3<SD
RD-A >3>-YELLOW
RD-B >4>-GREEN
+12V >5>-RED
EXT BUZZ >6>-BLACK
GND >7>-SHIELD-<5<SG

RS232C SETTINGS
· 4800BPS,
· 8BIT,
·1STOP BIT,
· PARITY NONE,
· CONTROL Xon/Xoff