Wayne-Dalton 8100 Windload ユーザーズマニュアル

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local

yellow pages business listings or go to the Find a Dealer section online at

Tools Needed:

❉ 

hea

der

Tape Measure

OPERATOR MUST BE TESTED AT TIME OF
INSTALLATION AND MONThLY ThEREAFTER AS
DESCRIBED IN YOUR OPERATOR’S INSTALLATION
INSTRUCTIONS AND OWNER’S MANUAL, TO ENSURE
ThAT DOOR SAFETY FEATURES FUNCTION. FAILURE
TO TEST OR MAkE ANY NECESSARY ADjUSTMENTS
OR REPAIRS, CAN RESULT IN SEVERE OR FATAL
INjURY

1.  Attach operator rail to suitable mounting  

surface, 2 x 6 lumber minimum.

2.

Install operator rail 1” to 1-1/2” (25 - 38 mm)

above high arc of top section of the door.

3.

Attach operator to ceiling using perforated

angle.

4.

Mount operator to ceiling so that 1” to 1-1/2”

(25 - 38 mm) clearance is maintained between

trolley rail and top section when door is fully

open (trolley rail will slope down towards rear).

5.

Attach door arm to operator bracket with cotter

and clevis pin.

IMPORTANT: ANGLES MUST BE SECURELY ATTAChED
TO SOUND FRAMING MEMBER(S).

Operator

Framing members

Perforated angle

Perforated angle

Operator rail

Operator rail

Trolley arm attachment

Clevis pin

Cotter

pin

Operator

bracket

Door arm to

trolley arm