Vermont Casting VM448 ユーザーズマニュアル

Never use Natural Gas in a Grill that has been configured to burn Propane Gas, (and never use Propane Gas in a Grill 

that has been configured to use Natural Gas) to avoid possible bodily injury. Always consult the Rating Label on the 

back of the Grill to confirm that it has been configured to burn Propane Gas.
Always install the pressure regulator and Type 1 propane gas supply coupling and hose that has been provided with 

your Propane Grill, as pictured in Figure 2.

• 

Always install a standard 20 lb. propane cylinder that has been equipped with a Type I valve outlet as shown in 

Figure 3, and that is 12” in diameter and 18” in height. Always use a propane cylinder that has been constructed 

and marked in conformance 

with either the specifica-

tions for LP Gas Cylinders 

of the U.S. Department 

of Transportation or the 

specifications in the Na-

tional Standard of Canada, 

CAN/CSA-B339, Cylinder, 

Spheres and Tube for Trans-

portation of Dangerous 

Goods, as applicable. 

•

  Always confirm that 

your propane cylinder is 

equipped with a shutoff 

valve terminating in a Type 

I propane cylinder valve 

outlet connection, and that it has been provided with a collar to 

protect the cylinder valve.

•

  Never install a propane cylinder in this Grill unless it is 

equipped with a listed Overfill Protection Device (OPD).

•

  Always have a new propane cylinder properly purged of air by 

your certified propane gas dealer. Since a new cylinder is initially 

filled with air, the air must first be purged before it is filled with 

propane.

•

  Always visually inspect the gas supply line for fraying, cracking 

or rodent damage before each use of this Grill and, if neces-

sary, install a replacement hose and regulator obtained from the 

manufacturer prior to lighting this Grill.

•  Always 

place a dust cap on the cylinder valve outlet whenever 

the cylinder is not in use and always install the dust cap that was 

provided with the cylinder valve. The use of an incorrect dust 

cap could result in leakage of propane.

Page 2

����
�������
����

Shutoff Valve

Collar

B125

����
��������������
����

Check hose for breaks 
or wear before each 
use.

Type 1 Connector

Regulator

B124

To Main Burner Manifold

To Side Burner 
Valve