Broilmaster T3CN-1 T3CF-1 ユーザーズマニュアル

Although the manufacturer has attempted to ensure that your grill will operate properly and satisfactorily, some-

times problems do arise.  The following troubleshooting guide lists several possible problems and their probable 

cause and solution.

Burner will not light.

Gas injector not inserted in venturi 

tube.

Realign/engage gas injector with the 

venturi tube.

Clogged gas injector.

Remove gas injector from gas control 

assembly and clean.

Obstruction in gas line.

For propane models, ensure gas valve on 

cylinder is OFF. Remove flexible hose 

and blow out any debris.

Spider webs in venturi tubes.

Clean venturi tubes. See Maintenance 

Section.

Misalignment of collector box and 

burner.

Position electrode properly. Clean col-

lector box.

Out of gas.

Refill LP gas cylinder. If natural model, 

turn on gas at source.

Dead battery.

Replace with AA Alkaline battery.

Inadequate grill temperature. Poor combustion.

Adjust air shutter.

Misalignment of venturi tube and 

gas injector.

Realign/engage gas injector with the 

venturi tube.

Inadequate gas pressure.

Contact gas supplier for assistance.

Incorrect orifice/valve setting.

Refer to gas conversion instructions in 

this manual.

Flames off the burner.

Cold grill.

Preheat grill at least 5 minutes on HI 

with the grill lid closed.

Misalignment of burner tube and 

gas injector.

Realign/engage gas injector with the 

burner tube.

Poor combustion.

Adjust air shutter.

Extreme wind.

Turn or shield grill.

Yellow flames.

Air shutter improperly set.

Open air shutter.

Spider webs in venturi tubes.

Clean venturi tubes. See Maintenance 

Section.

Seasoning salts on burner.

Clean by washing burner with mild 

detergent.

Oil film on burner.

Allow burner to operate on HI for 10-15 

minutes.