Broilmaster SS26P-1 ユーザーズマニュアル

B101586-7-1012

Page 22

7.  Arrange with your local gas company or licensed contractor to 

have a gas supply line connected to the inlet of the stainless 

steel flex tube assembly. The gas supply must have a shutoff 

valve that is close to the post in case of emergency and must 

be shutoff when the grill is not in use. See Figure 8.
The grill and its individual shutoff valves must be disconnected 

from the gas supply piping system during any pressure testing 

of that system at test pressures in excess of 1/2 PSIG. The 

grill must be isolated from the gas supply piping system by 

closing its individual manual shutoff valves during any pres-

sure testing of the gas supply piping system at test pressures 

equal to or less than 1/2 PSIG.

WARNING: DO NOT SUPPLY LP GAS TO A GRILL DE-

SIGNED FOR NATURAL GAS OR NATURAL GAS TO A 

GRILL DESIGNED FOR LP GAS.
Gas leak tests should be completed as directed in the grill 

Owner’s Manual.
Completely fill remaining hole with soil.

24 3/4”

ABOVE GRADE

8.  Install the post access door and grease cup as shown in Fig-

ures 9 and 10.

STEP #1

STEP #2

STEP #3

STEP #4

NOTE: GAS LINE REMOVED FOR CLARITY

9.  Continue assembly as directed by the Owner’s Manual pack-

aged with the grill head.
Test for gas leaks as directed by the grill’s Owners Manual. The 

grill and its individual shutoff valves must be disconnected from 

the gas supply piping system during any pressure testing of 

that system at test pressures in excess of 1/2 PSIG. The grill 

must be isolated from the gas supply piping system by closing 

its individual manual shutoff valves during any pressure testing 

of the gas supply piping system at test pressures equal to or 

less than 1/2 PSIG. 

WARNING: DO NOT SUPPLY LP GAS TO A GRILL DE-

SIGNED FOR NATURAL GAS OR NATURAL GAS TO A GRILL 

DESIGNED FOR LP GAS.
Gas leak tests should be completed as directed in the grill 

owner’s manual.