Panasonic VL-FAN1BX ユーザーズマニュアル
Installation
14
Installing the repeater
After completing the registration to the main monitor station, install the repeater.
L Refer to “For best performance” on page 5.
L Refer to “For best performance” on page 5.
1
Connect the AC cord to the AC adaptor, then connect the AC cord to the power outlet.
L�
The POWER indicator lights in green.
Lights in green.
DC IN jack
To power outlet
(100 – 240 V AC)
AC adaptor
DC plug
AC cord
2
Confirm the STATUS indicator.
L�
The STATUS indicator shows the radio signal status. Install the repeater in a location
where the indicator lights in green.
STATUS
indicator
Status
Lights in green.
Strong
Able to install the
repeater.
Lights in amber.
L In places where the
indicator lights in
amber or red, calls
may be interrupted
or disconnected.
Lights in red.
Weak
Flashing in red.
Out of range Unable to install the
repeater.
Change the location.
3
Install the repeater.
Note:
L�
It is recommended that you install the repeater in a location where the STATUS indicator
lights in green although you can install it in other places where the indicator lights in
amber or red.
L�
Use only the included Panasonic AC adaptor PQLV202.
VL-FAN1BX_0329.indd 14
2006/03/29 20:23:43