Sharp 0NY42M184304B(1) ユーザーズマニュアル

9

E

ENGLISH

The PN-ZB01 expansion board (optional) allows the use of
additional connection terminals.

•  Set DVI of INPUT SELECT on the OPTION menu

according to the device to be connected.

•  Select the audio input terminal to be used in PC DVI-D or

AV DVI-D of AUDIO SELECT on the OPTION menu.

•  Set BNC of INPUT SELECT on the OPTION menu to PC

RGB when using the PC RGB input terminals.

•  Select the audio input terminal to be used in PC RGB of

AUDIO SELECT on the OPTION menu.

•  Set BNC of INPUT SELECT on the OPTION menu to

AV COMPONENT when using the AV component input
terminals.

•  Select the audio input terminal to be used in AV

COMPONENT of AUDIO SELECT on the OPTION menu.

•  Select the audio input terminal to be used in AV VIDEO of

AUDIO SELECT on the OPTION menu.

•  Select the audio input terminal to be used in AV S-VIDEO

of AUDIO SELECT on the OPTION menu.

•  Set the audio input terminal to be used in each input

mode in AUDIO SELECT on the OPTION menu.

•  You can control the monitor from a PC on a network by

connecting a commercially available LAN cable between 
this terminal and a network.

•  To use external speakers, set SPEAKER SELECT on the

SETUP menu to EXTERNAL.

•  Be sure to use external speakers with an impedance of 6

Ω or greater and a rated input of at least 10 W.

1

3

2

Approx.

3-15/16 inch

(10 cm)

1. Attach a speaker cable core (included with the PN-ZB01) to

the end of the speaker cable connected to the monitor.

2. While pushing the tab, insert the tip of the cable.
3. Release the tab.

TIPS

•  Be sure to connect the + and - terminals and the left and

right speakers properly.

•  Avoid short circuiting the + and - terminals.

•  When SPEAKER SELECT is set to EXTERNAL, the

internal speakers are disabled.

•  The video of the PC/AV DVI-D input can be output to an

external device.

•  Outputting HDCP-encrypted video requires an external

device which supports HDCP.

•  This terminal allows the daisy chain connection of up to 5

monitors.

TIPS

•  The length of the signal cables or surrounding environment

may affect the image quality.

•  The screen may not display properly when using terminals

other than PC DVI-D/AV DVI-D for the input mode. In this
case, turn off the power to all the monitors connected in a 
daisy chain and then turn the power on again.

•  When connecting monitors in a daisy chain set AUTO

INPUT CHANGE to OFF.

•  Video output is disabled in the following cases: 

When the input mode is PC HDMI/AV HDMI 

When PIP SOURCE of the PIP/PbyP menu is set to PC

HDMI or AV HDMI 

When the power is turned off 

When the monitor is in input signal waiting mode