Masterbuilt 20042711 ユーザーズマニュアル

Place heat insulations washers (H) on ash can 
handle as shown. Insert handle (6) into ash can 
(5) and secure using aluminum flat washers (F) 
and hex nuts (D).

STEP 6.  

Place heat insulation washers (H) on lid
handle (10) as shown. Insert screws on lid 
handle (10) into holes in kettle lid (1).  Add lid 
hook (12) then aluminum flat washers (F) and 
secure with hex nuts (D).

Note: Do not over tighten.  Damper should 
move freely.

Attach air damper (13) to kettle lid (1)  using 
phillips head screw (B) and hex lock nut (C).

7

Insert lighting grate (18) into assembled ash 
can (5) as shown below.

Slide assembled ash can (5) onto guides of 
ash can spacer ring (7).

Place charcoal grate (16) inside kettle base (2).  

Rest cooking grate (15) on kettle base (2) as 
shown.

Place kettle lid (1) onto kettle base (2).