Masterbuilt 20043011 ユーザーズマニュアル
10
A
D
10
9
17
D
B
2
18
STEP 9.
Align holes on assembled side shelf
(18) with holes on grill body (2) and leg
bracket (10) as shown.
(18) with holes on grill body (2) and leg
bracket (10) as shown.
Insert phillips head screw (A) through
holes on body (2) into side shelf (18).
Secure using hex flange nuts (D).
holes on body (2) into side shelf (18).
Secure using hex flange nuts (D).
Attach shelf support brackets (17) to
top holes in leg bracket (17) using phil-
lips head screws (B). Secure using hex
flange nuts (D).
top holes in leg bracket (17) using phil-
lips head screws (B). Secure using hex
flange nuts (D).
Do not fully tighten screws at this
time.
time.
STEP 11.
Align holes on assembled front shelf
(6) with holes on grill body (2) and
legs as shown.
(6) with holes on grill body (2) and
legs as shown.
Insert phillips head screw (A) from
inside grill body to front shelf (6).
Secure using hex flange nuts (D).
inside grill body to front shelf (6).
Secure using hex flange nuts (D).
Attach shelf support brackets (7) to
grill legs using phillips head screws
(B). Secure using hex flange nuts (D).
grill legs using phillips head screws
(B). Secure using hex flange nuts (D).
Tighten all hardware at this time.
A
B
6
7
2
D
D
STEP 10.
Attach shelf support brackets (7) to
front shelf (6) using phillips head
screws (A).
front shelf (6) using phillips head
screws (A).
Note: Position brackets so sharper
angled ends are used to connect to
grill legs.
angled ends are used to connect to
grill legs.
Do not fully tighten at this time.
6
A
7
9
STEP 12.
Steps 12-15 require assistance.
Get a helper!
Align grill lid (1) with grill body (2) as
shown. Secure grill lid (1) to grill body
(2) using carriage bolt (F).
shown. Secure grill lid (1) to grill body
(2) using carriage bolt (F).
Repeat step on opposite end.
2
1
F