Mitsubishi Electronics QD75P4 ユーザーズマニュアル
Appendix - 79
MELSEC-Q
APPENDICES
Appendix 10.4 Positioning monitor
With the positioning monitor function, the QD75 operating status can be confirmed,
and debugging can be performed.
The following five types of monitors are available in this function:
and debugging can be performed.
The following five types of monitors are available in this function:
Axis Monitor
: The actual status of each axis can be monitored.
Starting History
: 16 starting history logs of operations such as positioning
operation, JOG operation, and manual pulse generator
operation can be monitored.
operation can be monitored.
Error History
: 16 error history logs can be monitored.
Warning History
: 16 warning history logs can be monitored.
Module Information List : Signals and flag ON/OFF status of each axis can be
monitored.
Axis Monitor
(1) Operating
procedure
1. Starting the "Positioning Monitor" window
Display the "Positioning Monitor" window.
[Tool]
[Tool]
[Intelligent Function Module Tool]
[QD75/LD75 Positioning
Module]
[Positioning Monitor…]
By default, the "Axis Monitor" window is displayed. When displaying the "Axis
Monitor" window from the status which another window is selected, proceed
according to the 2. below.
Monitor" window from the status which another window is selected, proceed
according to the 2. below.