Briggs & Stratton 5900834 ユーザーズマニュアル

Regular Maintenance

 1.  Warm engine by running for a few minutes.  (Refer 

to the engine operator’s manual for oil & filter 
replacement instructions.)

 2.  Route the oil drain hose (A, Figure 13) over the 

side of the engine deck and underneath the fuel 
tank.

 3.  Place a small pan under the oil drain hose to catch 

the oil.  Using the appropriate tools, remove the 
cap from the oil drain hose and drain the engine 
oil.

 4.  After draining, replace the cap and wipe up any 

spilled oil.  Reposition the oil drain hose so that is 
curved away from the engine and in front of the 
left hydraulic pump.

 5.  Place an absorbent shop cloth under the engine oil 

filter (B).  Remove the engine oil filter and replace 
with a new one.

 6.  Remove the shop cloth and wipe up any spilled oil.

 7.  Add new oil through the engine oil fill (C).  See 

the engine operator’s manual for specific oil 
recommendations.

Not 

for  

Reproduction