Briggs & Stratton 5900834 ユーザーズマニュアル

Regular Maintenance

The height of the seat (A, Figure 27) can be adjusted 
either up or down and the position of the seat can be 
adjusted forward or back to accomidate the operator’s 
comfort level.

 1.  Remove the seat height adjustment hardware (B).

 2.  Position the seat at the desired height and 

distance and reinstall and tighten the seat 
adjustment hardware.

If the unit “creeps” while the ground speed control 
levers are in the NEUTRAL position, then it may be 
necessary to adjust the linkage adjuster rods.

 1.  Park the machine on a flat, level surface such as 

a concrete floor.  Disengage the PTO, engage the 
parking brake and turn off the engine.

 2.  Loosen the jam nut (A, Figure 28).

 3.  Turn the linkage rod adjuster (B) to adjust the 

neutral of the machine:

 

•  If the machine creeps forward, turn the linkage 

rod adjuster CLOCKWISE.

 

•  If the machine creeps backwards, turn the 

linkage rod adjuster COUNTER-CLOCKWISE.

 4.  Retighten the jam nut when adjustment is 

complete.

 5.  Start the engine.

 6.  Disengage the parking brake and make sure all 

controls are in the NEUTRAL position.

 7.  If the machine still “creeps” repeat the NEUTRAL 

ADJUSTMENT procedure.  It may take several 
attempts to achieve neutral depending on how 
much the machine creeps.

Not 

for  

Reproduction