Philips SHQ7300 ユーザーズマニュアル
6
EN
5 Use your
headset
Connect the headset to a
Bluetooth device
1
Turn on your mobile phone/Bluetooth
device.
2
Press and hold the on/off button to turn
the headset on.
»
The blue LED flashes.
»
The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
•
If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.
Note
•
If the headset fails to connect to any Bluetooth device
within range in 5 minutes, it will switch off automatically
to save the battery life.
Manage your calls and music
On/off, call/music control button
Task
Operation
Sound
or LED
indicator
Turn the headset
on.
Press and
hold for 2
seconds.
Power on
tone
Turn the headset
off.
Press and
hold for 4
seconds.
Power off
tone
Play or pause
music.
Press once.
N/A
Pick up/hang up
a call.
Press once.
1 short
beep
Reject an
incoming call.
Press and
hold
1 short
beep
Redial the last
number.
Press twice.
2 short
beeps
Switch caller
during a call.
Press twice
1 short
beep
Volume/Track control button
Adjust volume.
Press once
N/A
Skip forward.
Press and hold
N/A
Skip backward.
Press and hold
N/A
Other headset indicator status
Headset status
Indicator
The headset is connected
to a Bluetooth device,
while the headset in
standby mode or while you
are listening to music.
The blue LED
flashes for every
6 seconds.
The headset is ready for
pairing.
The LED flashes
blue and white
alternately.
The headset is on but not
connected to a Bluetooth
device.
The blue LED
flashes quickly.
There is an incoming call.
The blue LED
flashes once per
second.
The battery level is low.
The white LED
flashes.
The battery is fully charged. The white LED
is off.