ZyXEL Communications UNS Series ユーザーズマニュアル
Chapter 19 Pool
UNS Series User’s Guide
79
19.2.3 Pool Expand Screen
Click Configuration > Storage Configuration > Pool > Expand to display the following screen.
Figure 53 Configuration > Storage Configuration > Pool > Expand
The following table describes the items on this screen.
19.2.3.1 Expanding a Pool
The following instructions provide an example for expanding a pool capacity. In the example, Pool1
is used to expand its capacity by adding a RAID set. For instruction purposes, a RAID 5 set with 4
disks will be added to Pool1.
is used to expand its capacity by adding a RAID set. For instruction purposes, a RAID 5 set with 4
disks will be added to Pool1.
In the
, Pool1 is configured as a RAID 0 (two disks) pool.
Table 38 Configuration > Storage Configuration > Pool > Expand
LABELS
DESCRIPTIONS
Pool Name
Enter the name for the storage pool.
RAID Level
Click this to select the RAID type for the storage pool.
Select physical disks
Select the disks to include in the pool expansion.
Note: Different RAID levels require different minimum number of disks.
Slot
Displays the slot location on the device.
Size (GB)
Displays the total capacity of the disk.
Status
Displays the current status of the disk: Online / Failed.
Health
Displays the current health of the disk: Good, Failed, Error alert, Read errors, or
Reserved.
Reserved.
Usage
Displays the usage status of the disk: RAID, Free disk, or Dedicated spare.
SSD
Identifies if the disk is an SSD device: No / Yes.
Vendor
Displays the vendor name of the disk.
Rate
Displays the disk rate: SAS 3/6 (GB/s), SATA 1.5/3/6 (Gb/s)
Back
Click Back to go to the previous screen.
Next
Click Next to continue and confirm the changes.
Reset
Click Reset to discard the changes.