3com WX4400 3CRWX440095A ユーザーズマニュアル
396
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
Examples — The following command configures a WX to require
Distributed MAPs to have encryption keys:
Distributed MAPs to have encryption keys:
WX4400# set ap security require
See Also
set ap
upgrade-firmware
upgrade-firmware
Disables or reenables automatic upgrade of a MAP access point boot
firmware.
firmware.
Syntax —
set ap auto upgrade-firmware {enable | disable}
ap auto
— Configures firmware upgrades for the MAP configuration
enable
— Enables automatic firmware upgrades.
disable
— Disables automatic firmware upgrades.
Defaults — Automatic firmware upgrades of MAP access points are
enabled by default.
enabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0. Option auto added for
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
Usage — When the feature is enabled on an WX port, a MAP access
point connected to that port upgrades its boot firmware to the latest
version stored on the WX switch.
point connected to that port upgrades its boot firmware to the latest
version stored on the WX switch.
Examples — The following command disables automatic firmware
upgrades on the MAP access point connected to port 6:
upgrades on the MAP access point connected to port 6:
WX1200# set ap 6 upgrade-firmware disable
See Also