3com WX4400 3CRWX440095A ユーザーズマニュアル
set confirm
57
set confirm
Enables or disables the display of confirmation messages for commands
that might have a large impact on the network.
that might have a large impact on the network.
Syntax —
set confirm {on | off}
on
— Enables confirmation messages.
off
— Disables confirmation messages.
Defaults — Configuration messages are enabled.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — This command remains in effect for the duration of the session,
until you enter a quit command, or until you enter another set confirm
command.
until you enter a quit command, or until you enter another set confirm
command.
MSS displays a message requiring confirmation when you enter certain commands
that can have a potentially large impact on the network. For example:
that can have a potentially large impact on the network. For example:
WX4400# clear vlan red
This may disrupt user connectivity.
Do you wish to continue? (y/n) [n]
Examples — To turn off these confirmation messages, type the following
command:
command:
WX4400# set confirm off
success: Confirm state is off
set length
Defines the number of lines of CLI output to display between paging
prompts. MSS displays the set number of lines and waits for you to press
any key to display another set, or type q to quit the display.
prompts. MSS displays the set number of lines and waits for you to press
any key to display another set, or type q to quit the display.
Syntax —
set length number-of-lines
number-of-lines
— Number of lines of text to display between
paging prompts. You can specify from 0 to 512. The 0 value disables
the paging prompt action entirely.
the paging prompt action entirely.
Defaults — MSS displays 24 lines by default.
Access — All.