3com WX4400 3CRWX440095A ユーザーズマニュアル
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
set port media-type
91
See Also
set port media-type
Disables the fiber interface and enables the copper interface on an
WX4400 gigabit Ethernet port.
WX4400 gigabit Ethernet port.
Syntax —
set port media-type port-list rj45
port-list
—List of physical ports. MSS sets the preference on all the
specified ports.
rj45
—Uses the copper interface.
Defaults — The GBIC (fiber) interface is enabled, and the copper
interface is disabled, by default.
interface is disabled, by default.
Access — Enabled.
History — Introduced in MSS Version 4.0.
Usage — This command applies only to the WX4400.
If you set the port interface to RJ-45 on a port that already has an active
fiber link, MSS immediately changes the link to the copper interface.
fiber link, MSS immediately changes the link to the copper interface.
Examples — The following command disables the fiber interface and
enables the copper interface on port 2:
enables the copper interface on port 2:
WX4400# set port media-type 2 rj45
See Also