Polycom SIP 2.2.0 ユーザーズマニュアル

Administrator’s Guide SoundPoint IP / SoundStation IP 

4 - 22

• The phone keys without removable key caps cannot be remapped. These 

include:
— Any keys on the dial pad
— Volume control
— Handsfree, Mute, Headset
— Hold
— Navigation Cluster

Configuration changes can performed centrally at the boot server:

For more information on the default feature key layouts, refer to 

 on page 

.

More than one Line Key can be allocated to a single registration (phone 

number or line). The number of Line Keys allocated per registration is 

configurable.
Configuration changes can performed centrally at the boot server or locally:

Configuration File:  
sip.cfg

Set the key scrolling timeout, key functions, and sub-pointers for each 
key (usually not necessary).  

For more information, refer to 

Configuration file: 
phone1.cfg

Specify the number of line keys to assign per registration.

For more information, refer to 

 on page 

.

Web Server 

(if enabled)

Specify the number of line keys to assign per registration.

Navigate to http://<phoneIPAddress>/reg.htm

Changes are saved to local flash and backed up to <Ethernet 
address>-phone.cfg on the boot server. Changes will permanently 
override global settings unless deleted through the Reset Local 
Config menu selection and the <Ethernet address>-phone.cfg is 
removed from the boot server.

Local Phone User 
Interface

Specify the number of line keys to assign per registration using the 
SIP Configuration menu. Either the Web Server or the boot server 
configuration files or the local phone user interface should be used to 
configure registrations, not a mixture of these options. When the SIP 
Configuration menu is used, it is assumed that all registrations use 
the same server.