Mitsubishi Electronics 3DC-1000 ユーザーズマニュアル

This apparatus shall not be exposed to dripping or splashing and no objects 
filled with liquids, such as vases, shall be placed on the apparatus.
Cet appareil ne doit pas être exposé à des gouttes ou à des éclaboussures et 
aucun objet rempli d’un liquide, comme un vase, ne doit être placé sur l’appareil.

WARNING.  To reduce the risk of fire or electric shock, do not expose this 

apparatus to rain or moisture.

Note:  Features and specifications described in this owner’s guide are 
subject to change without notice.

•

 

-

Mitsubishi 738 and 838 series televisions loaded with software 
version 12.06 or higher may not require use of the adapter.  
These models do require the adapter, however, to display 3D 
from sources not outputting HDMI 1.4a mandatory formats.

 

-

Mitsubishi 738 and 838 series televisions that are not loaded 
with software version 012.06 or higher require the use of an 
adapter until the firmware is updated in order to display 3D 
sources that output HDMI 1.4a mandatory formats.  Please visit 
www.mitsubishi-tv.com/3Dupgrade for more information.

•

All other 3D-ready Mitsubishi TV models.  In all cases, all other 
3D-ready TV models require use of the adapter for all HDMI 1.4a 
mandatory formats.

•

3D Glasses.  For all models, Active Shutter 3D Glasses with match-
ing synchronization emitter or DLP Link Active Shutter 3D glasses 
are required in order to view 3D content.

The Mitsubishi 3D Adapter, Model 3DC-1000, may be used to display 
3D content only when connected to a Mitsubishi 3D Ready TV or a 
Mitsubishi 3D TV.  A 3D source device coupled with the Mitsubishi 3D 
Adapter is required to support display of 3D games, 3D broadcasts 
from terrestrial/cable/satellite and 3D Blu-ray disc content.