Rocketfish RF-GPS3101 プリント

Before you use the controller for the fi rst time, or after you have 
not used it for a long time, you must charge the battery. (If the 
controller will not be used for long periods of time, the battery 
should be recharged at least once every six months.) It takes 
approximately 3.5 hours to fully charge the battery. 

1  Insert the mini-USB plug on the charging cable into the USB 

port on the front of the controller.

 
IMPORTANT: Make sure that the min-USB plug is aligned correctly with 
the port before inserting into the plug to avoid damaging either the port 
or the plug.
NOTE: Recharging a battery that has not been fully 
discharged shortens its life. 

2  Insert the USB plug into the USB port on your PS3, 

which must be plugged in and drawing power. 

3  Turn on your PS3. The battery starts charging 

and the PS button in the middle of 
the controller lights blue. When the 
battery is fully charged, the PS light 
turns off .

Congratulations on your purchase of a new Rocketfi sh Rapid Fire 
Wireless Controller. This controller was designed with input from 
gamers and includes some exciting new features: 

• A 

modifi ed design: better stick placement; a responsive, 

one-piece directional pad; improved handle ergonomics, and 
one-button Rapid Fire

•  TouchSense®, dual rumble motors for lifelike vibration
•  Wireless connectivity to your PS3™ console
•  Power up your PS3™ console directly from the controller
•  A built-in, rechargeable NiMH battery

•  Wireless controller with a built-in, rechargeable battery
•  9 ft. (2.74 m) USB charging cable

RF-GPS3101

PS button

Select button

Left stick

Rapid Fire button

Directional pad

Start button

USB port

R1 button

R2 button

Port indicators

L1 button

L2 button

Before you use your controller, you need to pair it with your PS3 
console.

1  Connect the USB cable between your controller and PS3 

console.

2  Turn on the controller, then press its PS button. When the PS3 

recognizes your controller, all the port indicators fl ash slowly.

 

PS

2 1

4 3

2 1

4 3

3 Press 

the 

PS button again to assign a port number.

Notes:

• 

Pairing and assigning controller numbers can only be done when the 
system is turned on.

• 

When a paired controller is used with another PS3 system, the pairing 
with the original system is cleared. Pair the controller with the system 
again if the controller has been used with another system.

• 

If the controller or the system is turned off , the port indicators on the 
controller turn off  and the assigned number is cleared.

 button

 button

 button

 button

11 Right stick/R3 button
12 Power switch

When your controller has been 

assigned to a port, the indicator 

number for the port turns solid red.

PS

PS