Philips AT940 ユーザーズマニュアル

ページ / 190
Removing the rechargeable shaver battery
Only remove the rechargeable battery when you discard the shaver. 
Make sure the rechargeable battery is completely empty when you 
remove it.
 1 
 Disconnect the shaver from the mains. 
 2 
 Let the shaver operate until it stops.
 3 
 Undo the screws in the back of the shaver and in the hair chamber. 
 4 
 Remove the front panel and the back panel.
 5 
 Bend the 6 hooks aside and take out the power unit.
Be careful, the hooks are sharp.
 6 
 Remove the battery.
Be careful, the battery strips are sharp.
Do not connect the shaver to the mains again after you have removed 
the rechargeable battery.
Guarantee and support
If you need information or support, please visit www.philips.com/
support or read the separate worldwide guarantee leaflet. 
Guarantee restrictions
The shaving heads (cutters and guards) are not covered by the terms of 
the international guarantee because they are subject to wear.
Troubleshooting
This chapter summarises the most common problems you could encounter 
with the appliance. If you are unable to solve the problem with the 
information below, visit www.philips.com/support for a list of frequently 
asked questions or contact the Consumer Care Centre in your country. 
ENGLISH
18