Albatron Technology DM-6952KF ユーザーズマニュアル
16
Note
：
Volume control function will effect while connect with Vision Converter.
SET
Through DM RS232 V0.9 (Serial Transmission Communication
interface) to remote control the device. To identify the monitor, you
must to set an ID number (ID=1~99) to each of the monitor under
DM RS232 V0.9 Control page.
interface) to remote control the device. To identify the monitor, you
must to set an ID number (ID=1~99) to each of the monitor under
DM RS232 V0.9 Control page.
ID
To set the ID number to control the monitor from the other.
TV
Select TV source.
VIDEO
Select VIDEO source.
S-VHS
Select S-VHS source.
Component
Select a Compound signal source:
Y,Pb,Pr —For High definition component inputs.(CT-1890).
Y,Cb,Cr—For Conventional component inputs.( CT-1890∕
CT-1892).
CT-1892).
VGA 1
Select VGA 1 source.
VGA 2
Select VGA 2 source.
TV∕PC∕AV
Select TV∕PC∕VIDEO∕S-Video∕COMPONENT∕switch
source.
source.
TV∕CATV
Select TV∕CATV source.
CH
+
∕
CH
-
Steps through the channels.
PIC-STD
Factory preset.
PIC∕PAGE
▲▼
Control and select items PIC-SEL button.
PIC-SEL
User video adjustment screens.
17
SYSTEM
Changes the video system on TV, Video, and S-VHS.
System types are PAL, PAL-M, PAN-N, and SECAM.
System types are PAL, PAL-M, PAN-N, and SECAM.
FINE TUNING
Allows for fine-tuning of channels.
CH-LOCK
For Parental Control.
FIELD
A FIELD 1 or FIELD 2 toggle. (Useable only when CCD is
on).
on).
LANG
Language Selection (1 or 2).
CAP∕TXT
Accessible only when CCD is on.
CCD
Caption control.