Motorola MTM5400 ユーザーズマニュアル
INSTALLATION
MTM5400 Mobile Terminal Installation Manual
35
tabs, using all 6 where possible, to hold it in place.
4.
Ground the mouting frame to the nearest vehicle chassis ground point.
Mounting the Radio in the Frame
1.
Provide the electrical connections to the radio for power, antenna and accessories.
2.
Plug in all the connectors and push the radio with its Remote Head Enhanced, or alternatively
the Data Expansion Head Enhanced, firmly onto the mounting frame until the two springs
snap into place.
snap into place.
Figure 7 Mounting the Radio into the Frame (Shown with Enhanced Control Head)
The tabs are easily bent back by twisting a large flat-
bladed screwdriver into the slot behind the tabs.
bladed screwdriver into the slot behind the tabs.
For a more secure installation the top and rear of the
frame should also be secured with screws.
frame should also be secured with screws.
The demount tool can be used as an aid to mounting as
well as demounting.
well as demounting.
The fixing tabs should be checked for tightness each time
the radio is removed. The tabs are easily tightened by
twisting a large flat-bladed screwdriver in the slot behind
the tabs.The frame is not designed for daily mounting and
demounting.
the radio is removed. The tabs are easily tightened by
twisting a large flat-bladed screwdriver in the slot behind
the tabs.The frame is not designed for daily mounting and
demounting.
1