Munchkin Crib ユーザーズマニュアル

Assembling the Cross Rails

Depress the Locking Pin on one half and push 
it into the other half of the rail. The Locking Pin 
pops into place when the pieces are securely 
attached, as shown in Fig. 1. Repeat for the 
second Cross Rail.

Locking Pin

Fig. 1

Fig. 2

Fig. 4

Push
Forward

Installing the Cross Rails 

Detach the 2 Pocket Flaps on both sides of the 
Bedrail. Insert the Cross Rails into the middle 
and bottom pockets, as shown in Fig. 2. Starting 
from the left side of the Bedrail, slide the small 
end of the Cross Rail into the pocket. Depress 
the Locking Pin and push into the Receiver on the 
right side of the Bedrail. The Locking Pin pops 
into place when the pieces are securely attached. 
To secure the left side of the Cross Rail into the 
corresponding Receiver, first depress the Locking 
Pin, then pull back on the Locking Piece as shown 
in Fig. 3. Insert the Cross Rail into the Receiver 
and push the Locking Piece forward as shown 
in Fig. 4. The Locking Pin pops into place when 
the pieces are securely attached. Re-attach the 2 
Pocket Flaps when finished.

Repeat steps for the bottom Cross Rail.

Fig. 3

Pull

Back

Depress 
locking pin