Novatel OM-20000041 ユーザーズマニュアル
I
Information Messages
MiLLennium GPSCard Software Version 4.50 Command Descriptions Manual Rev 1
241
Invalid Parity Option
The parity in a COMn command is invalid.
Invalid Port
The port in a SEND command is invalid.
Invalid Port number
The port number in an ACCEPT command is invalid.
Invalid PPS Modulus Field
The ppsmod argument of the FREQUENCY_OUT command is invalid.
Invalid RINEX Option
An option of a RINEX command is invalid.
Invalid RTCA option
An invalid RTCA rule has been entered.
Invalid RTCA station Name (\XXXX\)
The RTCA station name in a FIX POSITION message is invalid.
Invalid RTCM Bit Rule
An invalid RTCM rule has been entered.
Invalid RTCM station Name (0..1023)
The RTCM station name in a FIX POSITION message is invalid.
Invalid RTCM16T string length - maximum 90
The RTCM16T string exceeds 90 characters.
Invalid RTS choice
An invalid option was entered in the COMn_RTS command.
Invalid RTS Toggle Option
The active option in the COMn_RTS command is invalid.
Invalid RTS Toggle Setup Time (0-1000)
The lead time option in the COMn_RTS command is invalid.
Invalid RTS Toggle Terminate Time (0-1000)
The tail time option in the COMn_RTS command is invalid.
Invalid Satellite Number
An invalid satellite number has been entered in an ASSIGN, SETHEALTH,
LOCKOUT or UNLOCKOUT command.
LOCKOUT or UNLOCKOUT command.
Invalid Scaling
The scale value in a USERDATUM command is invalid.
Invalid Seconds Into Week in TM1A
The time in a $TM1A command is invalid.
Invalid SemiMajor Axis
The semi-major axis in a USERDATUM command is invalid.
Invalid Standard Deviation Limit (0.1-100 m)
A standard deviation in a POSSE command is invalid.
Invalid Symbol Period 1,2,4,5,10,20
The symbol period is invalid for an ASSIGN on a pseudolite channel.
Invalid Time Limit (0.1-100 hours)
The averaging time in a POSAVE command is invalid.
Invalid Token
This error should never occur. If it does, please contact NovAtel GPS customer
service.
service.
Invalid Track Offset
The track offset in the SETNAV command is invalid.
Invalid Velocity
An invalid velocity has been received, either in a FIX VELOCITY command, or in
a command such as $PVCA, $PVCB.
a command such as $PVCA, $PVCB.
Invalid Week Number in TM1A
The week in a $TM1A command is invalid.
MET Command Not Available On This Model
The MET command is not available on this model.
Model Invalid
The Authorization Code has an invalid Model. Please contact NovAtel GPS
customer service for assistance.
customer service for assistance.
NVM Error - Unable To Save
The SAVE operation did not complete successfully.
RINEX string too LONG
Indicates that the entered RINEX command is too long.
RT20 Logs Not Available On This Model
This model does not have the ability to send or receive RT20 differential
corrections.
corrections.
RTCM9 Logs Not Available On This Model
This model does not have the ability to send or receive RTCM9 logs.
SAVE Command Not Available On This Model
A SAVE operation was attempted which is not available on this model.
Save Complete
The SAVE operation completed successfully.
SETCLOCK disabled TM1A rejected
The $TM1A command is rejected because the user has not enabled clock
synchronization using the SETCLOCK command.
synchronization using the SETCLOCK command.
Standard Deviation not allowed with small time limits
In a POSAVE command, a standard deviation cannot be entered with a small
time. Enter a larger averaging time if standard deviations are desired.
time. Enter a larger averaging time if standard deviations are desired.
TO Portname too LONG
The TO port name in a SETNAV command is too long.
User Defined DATUM Not Set
This error should not occur. By default the user defined DATUM is set to WGS84.
If you get this error message, please contact NovAtel GPS customer service.
If you get this error message, please contact NovAtel GPS customer service.
Valid Option but Missing Process
This message indicates an error in the software. A command option is valid but
software cannot process it
software cannot process it