Soehnle 3015 ユーザーズマニュアル
470.600.017
Operating manual 3015
Operating manual Basic-Terminal Air Luggage 3015
Version V1.0
Date: 31.08.07
Page 3 of 4
No part of this document may be reproduce, stored in information retrieval systems, or transmitted, in any form or by any means- electronic, mechanical, photocopying, recording, or otherwise (German Civil Code)
Soehnle Professional GmbH
Soehnle Professional GmbH
Soehnle Professional GmbH
Soehnle Professional GmbH & Co. KG
& Co. KG
& Co. KG
& Co. KG | Postbox 1308 | D-71536 Murrhardt | Phone+49 (0) 7192 / 9319 – 0 | E-Mail info@soehnle-professional.com
www.soehnle-professional.com
Malufunctions causes and how to eliminate them:
Indicator
Elimination
- - O - -
The scale sets the value zero
automatically when it is switched
on. If the scales are outside the set
tolerance range - - 0 - - is displayed
automatically when it is switched
on. If the scales are outside the set
tolerance range - - 0 - - is displayed
Remove the items and if necessary
also the dirt from the weighing
platform. If the scale does not indicate
zero after a couple of seconds, you
should contact your service partner
also the dirt from the weighing
platform. If the scale does not indicate
zero after a couple of seconds, you
should contact your service partner
_ _ _ _ _ _
Underload: Only the bottom
horizontal lines appear on the
display
horizontal lines appear on the
display
Switch the scales off and on again. The
zero point will be reset automatically.
zero point will be reset automatically.
¯ ¯ ¯ ¯ ¯ ¯
Overload: Only the top horizontal
lines appear on the display. The
maximum weighing range has
been exceeded.
lines appear on the display. The
maximum weighing range has
been exceeded.
Remove some of the items from the
weighing platform.
weighing platform.
E r r 5
The zero setting range has been
exceeded
exceeded
Bei allen anderen ERROR- Meldungen
verständigen Sie bitte Ihren Service- Partner