Sony 4-144-907-43(1) ユーザーズマニュアル

D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm

STR-DA3500ES
4-144-907-43(1)

V/v to select 

V/v/B/b repeatedly to 

You can only enjoy the sound in zone 3.

x Power

Lets you turn zone operation on.
• Zone2-ON or Zone3-ON
• Zone2-OFF or Zone3-OFF

x Input

Lets you select the source that is output to the 
zone. You can output audio and video signals 
to zone 2 and only audio signals are output to 
zone 3.

x Volume

You can adjust the volume in the main zone. If 
“Sur Back Assign” is set to “ZONE2” in the 
Speaker setting menu, you can also adjust the 
zone 2 volume.

x 12V Trigger

You can turn the receiver on/off in another 
zone, or select various options for use of the 
12V Trigger function, as explained below.
• OFF

Lets you turn off output of 12V triggers even 
when the main receiver is turned on.

• CTRL

Lets you turn the output of 12V triggers on 
or off manually using the CIS command of 
the external control device.

• ZONE

Lets you turn the output of 12V triggers on 
or off based on whether the selected zone is 
turned on or off.

• INPUT (for “Main” only)

Lets you turn on the output of 12V triggers 
when the preset input is selected.
When you select “Input”, the setting display 
which sets each input trigger to on/off 
appears. Press 

V/v to select the input, then 

press 

 to check the box.

You cannot select FM/AM/DMPORT in zone 3.

• Even when this receiver is in standby mode (press 

?/1 on the remote to turned off this receiver), the 
receiver in zone 2 or zone 3 remains turned on. To 
turn off all receivers, press ?/1 and AV ?/1 on the 
multi function remote at the same time (SYSTEM 
STANDBY).

• Only signals from components connected to the 

analog input jacks are output through the ZONE 2 
OUT or ZONE 3 OUT jacks. No signals are output 
from components connected to only the digital 
input jacks.

• When SOURCE is selected, the signals input to the 

MULTI CHANNEL INPUT jacks are not output 
from the ZONE 2 OUT or ZONE 3 OUT jacks 
even when the multi channel input is selected. The 
analog audio signals of the current function are 
output.