NEC L234GC ユーザーズマニュアル

 

 

 

Viewing Angle Adjustment 

 

This product is designed to allow users to have a comfortable viewing angle. 

The viewing angle can be adjusted from -5°to +20°.  

 
Warning: Do not force the LCD Monitor over its maximum viewing angle as stated 
above. Attempting this will result in damaging the Monitor and Monitor stand. 

 

Detaching Main Body From Its Stand 

 

 

1. Remove the rear cover from rear stand assembly  

2. Remove the 5 screws from the hinge bracket  

3. Remove the stand from main body  

 

 Interface for Arm Applications 

 

Before installing to mounting device, please refer to Fig.1-5. 

The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, 

as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-

8. These specifications meet the VESA Flat Panel Monitor Physical Mounting 

Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November 

1997).  

 

Note 1: Please using Ø 4mm x 8mm (L) screw for this application. 

Note 2:  The LCD monitor should only be used with an approved arm (e.g. GS 

mark). To meet the safety requirements, the monitor must be mounted to an arm 

which guaranties the necessary stability under consideration of the weight of the 

monitor. 

100mm

100mm

100mm x 100mm

Screw Mounting Options

4mm ,0.7pitch threaded holes x4