3M 9900 Series ユーザーズマニュアル
11
• For small mat areas apply the cleaner with a trigger spray bottle. Scrub and
remove excess liquid from the mat surface with a dampened sponge or lint-
free cloth.
free cloth.
• For larger mat areas apply the cleaner with a mop and bucket. To reduce film
build-up change out the cleaning solution frequently.
Note: It is not necessary to rinse the mat surface.
5.0 Optional Accessories
3M
™
Test Kit for Static Control Surfaces 701
A lightweight, user-friendly megohmmeter plus all of the components needed to
make testing mats and other surfaces simple and accurate.
make testing mats and other surfaces simple and accurate.
701
Test Kit for Static-Control Surfaces
Kit contains:
1 Megohmmeter 12 0z. (340 g);
1.8 x 3.3 x 4.6 in. (4.57 x 8.38 x 11.68)
2 Test Weights 5 lbs. (2.27 kg) each
1 Insulated Bulldog Clip
1 Alligator Clip
1 Continuity Test Plate
2 Batteries (3.6V and 1.5V)
1 Operator’s Manual
1 Molded Carrying case
Kit contains:
1 Megohmmeter 12 0z. (340 g);
1.8 x 3.3 x 4.6 in. (4.57 x 8.38 x 11.68)
2 Test Weights 5 lbs. (2.27 kg) each
1 Insulated Bulldog Clip
1 Alligator Clip
1 Continuity Test Plate
2 Batteries (3.6V and 1.5V)
1 Operator’s Manual
1 Molded Carrying case
High-performance, all-purpose cleaner. For floors,
walls and other non-porous surfaces.
walls and other non-porous surfaces.
Contact: 3M Building and Commercial Services
Divison Care Division
1-800-852-9722
www.3M.com/commcare
Divison Care Division
1-800-852-9722
www.3M.com/commcare
Molded-in male snap fastener with integral 1-meg-
ohm resistor on one end, solderless terminal on other.
Connects all 3M
ohm resistor on one end, solderless terminal on other.
Connects all 3M
™
Anti-Fatigue Mats and Runners
9900 Series to building ground.
3M
™
General Purpose Cleaner (Product No. 8, 3M
™
Twist ‘n Fill System)
3M
™
Ground Cord 3040, 15 ft. with 10 mm Snap