Chariot Carriers CX 1 ユーザーズマニュアル

Push the handlebar into the upper frame open tube ends. 
Depress both spring buttons simultaneously and push both 
ends of the handlebar at the same time into the tube ends until 
the spring buttons engage. 

The handlebar can be height adjusted for two different 
positions: remove by depressing the spring buttons together, 
pull out the handlebar, rotate it 180° and re-insert the handlebar 
into the tube ends.

DANGER

Before each journey make sure that the spring buttons of the 
handlebar are fully engaged. A handlebar that works loose 
may have serious safety consequences, especially when the 
carrier is used as a Jogging Stroller or Stroller.

The handlebar of the CX is installed in the same manner as 
described in the section above. Only one position is possible 
however, as the ergonomic fi ve-position CX handlebar allows it to 
be gripped in various height positions, depending on use.

DANGER

Always make sure that you do not bend the brake cable of the 
CX. This might reduce the braking effect, or the brake may not 
even continue to function.

DANGER

Before each journey make sure that the spring buttons of the 
handlebar are fully engaged. A handlebar that works loose 
may have serious safety consequences especially when the 
carrier is used as a Jogging Stroller or Stroller.