HP ProLiant DL365 G5 510146-421 ユーザーズマニュアル
製品コード
510146-421
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL365 G5 Models
Standard Memory
NOTE: One of the following depending on model:
Performance Models: 4 GB PC2-5300 DDR2 DIMMs (667 MHz) installed (4 x 1 GB)
Base and Entry Models: 2 GB PC2-5300 DDR2 DIMMs (667 MHz) installed (2 x 1 GB)
High Efficiency Models: 2 GB PC2-5300 DDR2 Low Power DIMMs (667MHz) installed (2 x 1 GB)
Performance Models: 4 GB PC2-5300 DDR2 DIMMs (667 MHz) installed (4 x 1 GB)
Base and Entry Models: 2 GB PC2-5300 DDR2 DIMMs (667 MHz) installed (2 x 1 GB)
High Efficiency Models: 2 GB PC2-5300 DDR2 Low Power DIMMs (667MHz) installed (2 x 1 GB)
Upgrading Memory and Memory Interleaving
DIMMs must be installed in identical pairs. Bank interleaving is automatically enabled on a processor node under the following
conditions:
DIMMs must be installed in identical pairs. Bank interleaving is automatically enabled on a processor node under the following
conditions:
1) Four single ranked DIMMs populated per node (4 x 512 MB or 4 x 1 GB for example) yields 2-way bank interleaving.
2) Two dual ranked DIMMs populated per node (2 x 2 GB or 2 x 4 GB for example) yields 2-way bank interleaving.
3) Four dual ranked DIMMs populated per node (4 x 2 GB or 4 x 4 GB for example) yields 4-way bank interleaving.
2) Two dual ranked DIMMs populated per node (2 x 2 GB or 2 x 4 GB for example) yields 2-way bank interleaving.
3) Four dual ranked DIMMs populated per node (4 x 2 GB or 4 x 4 GB for example) yields 4-way bank interleaving.
If single and dual ranked DIMMs are mixed on the same node, bank interleaving will not be enabled.
Node interleaving can be configured via RBSU if both processors have the same memory footprint and is independent of bank
interleaving.
Node interleaving can be configured via RBSU if both processors have the same memory footprint and is independent of bank
interleaving.
Standard Memory Plus Optional Memory
Up to 26 GB memory is available with the standard memory of 1 GB and the optional installation of PC2-5300 DDR2 DIMMs (667
MHz) memory kits. - 6 slots would be available, and potentially could be filled with 4GB DIMM's.
Up to 26 GB memory is available with the standard memory of 1 GB and the optional installation of PC2-5300 DDR2 DIMMs (667
MHz) memory kits. - 6 slots would be available, and potentially could be filled with 4GB DIMM's.
Standard Memory Replaced with Optional Memory
Up to 32 GB of memory is available with the removal of the standard 512 MB of memory and the optional installation of PC2-5300
DDR2 DIMMs (667 MHz) memory kits.
Up to 32 GB of memory is available with the removal of the standard 512 MB of memory and the optional installation of PC2-5300
DDR2 DIMMs (667 MHz) memory kits.
NOTE: DIMM banks are active only when the corresponding processor socket is populated.
NOTE: Chart does not represent all possible configurations.
NOTE: Chart does not represent all possible configurations.
Memory
Slot
1
2
3
4
5
6
7
8
Standard
(Base, Entry,
and
Performance
Models)
(Base, Entry,
and
Performance
Models)
2 GB
1 GB
1 GB
Empty
Empty
Empty
Empty
Empty
Empty
Optional
26 GB
1 GB
1 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
Maximum
32 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
QuickSpecs
HP ProLiant DL365 Generation 5
Memory
DA - 12799 Worldwide QuickSpecs — Version 22 — 7.13.2009
Page 28