Sharp LCD COLOUR TELEVISION ユーザーズマニュアル

●

 

●

 

Adjust the headphone volume.

● 

Reduces volume differences (for advertisements that 
are too loud)

● 

Allows you to indicate which sound is output via the 
AV socket for dual sound programs: Sound1 (e.g. main 
language), sound 2 (e.g. foreign language) or sound 
1+2 (both simultaneously).

• 

Selectable items vary depending on the received broadcasts.

● 

Determines the maximum volume that can be set.

● 

Allows you to specify the volume that the TV is set when 
switched on with the mains switch.

● 

Set stereo balance so that the volume impression is 
identical on the left and right.

● 

If  Clear Voice is activated, the sound of the current 
programme is automatically output with optimum 
comprehensibility when speech is detected.

● 

Allows you to choose between PCM or Dolby Digital 
audio output.

In this item you can find all settings concerned with 
station search for TV and DVB radio as well as functions 
for creating and editing the various stations list.

1 Press 

2  Select Setup

→Stations, the next screen appears:

3  Select the station adjustment you want to adjust:

● 

In this adjustment, with the search wizard, you can 
search/update new stations.
The current search settings will be displayed. If you 
want to change these search settings:

Select Change search settings, press OK and wizard 
will ask you for search settings.

If you agree with these settings, select Start search/
update and press OK to start scan.

 

•

You have to repeat the initial installation (see page 9) and 
automatically search new ones, if you want to delete all 
existing stations.

● 

If you want to adapt the parameters of an existing 
station, first select the appropriate station.

1  Select  Manual Scan TV and press OK,  the next 

screen appears: 

2  Select the menu item Signal source to decide in 

which area you want to search for stations.
Depending on the selected source, various setting 
possibilities will be available.

3  Select Search to start search for next station.

4  Select Store to save station.

• 

Only stations for the selected signal source can be saved, 
which do not already exist in the station list.

Status bar for manual search
Status bars are displayed for manual search, which 
show the reception quality of the individual stations 
during the station scan. The markers in all bars 
should preferably be in the green area.

C/N:  (Carrier/Noise) The bar shows the signal to 
noise ratio. The value indicated in dB should be 
preferably high.

Level:  The bar shows the receiving level of the 
station. The value displayed in dBµV should be 
preferably high.

BER:  (Bit Error Rate) The bar shows the bit error 
rate of the station. The value for BER should be as 
low as possible.