Sharp LCD COLOUR TELEVISION ユーザーズマニュアル

● 

 

Allows you to set the AV standard of the connected 
device to AV or AVS.
Normally you leave the setting to Automatic. If the 
standard of the connected device is not detected 
automatically, you can select the correct standard.

NOTE
•  Ask your dealer or consult the operating manual of the 

connected device if  necessary.

● 

 

Allows you to set the signal type of the device 
connected to AV or AVS. 

● 

 

If this function is activated, the video and audio of 
an external device connected to the AV connector 
(not in AVS) will be automatically reproduced on all 
TV broadcast sites when reproduction is started up, 
provided that the external unit supplies a switching 
voltage.

● 

Here you can make further settings for comfortably 
linking external devices to the TV sets.

● 

 

Here you can select whether the TV set is to switch 
on automatically from standby mode, if HDMI-CEC 
capable devices connected to a HDMI input start 
playback or display a screen menu.

● 

 

You can allow or forbid the automatic communication 
between the TV set and linked external devices.

You can display the channel information that you are 
watching at this moment by pressing 

p on the remote 

control unit.

In the left lower corner you can see the number and 
name of the channel, the transmission time and (if 
available) the title of the current programme. The 
bar (if available) indicates the progress of the current 
programme.
In the right lower corner, the programme info is displayed 
additionally for DVB channels.

  Press  OK and the list of tuned channels will be 

displayed. 

  Use  ◄/►  to select the channel you want to watch 

and press OK.

You can watch overall station list or a personal list of 
channels by pressing