Sharp LCD COLOUR TELEVISION ユーザーズマニュアル

Press 

J

 to continue the installation.

Choose between Wired or Wireless connection.

• 

If you choose a wired connection to the router, you need 
an ETHERNET cable (not included, commercially available).

• 

If you do not have a broadband internet connection, consult 
the store where you purchased your TV or ask your internet 
service provider or telephone company.

• 

Wired and wireless connection cannot be used at the same 
time. Use only one of the connection types.

• 

A wireless LAN connection and performance cannot be 
guaranteed for all residential environments. In the following 
cases, the wireless LAN signal may be poor or drop, or the 
connection speed may become slower.
- When used in buildings made with concrete, reinforced 

steel, or metal.

- When placed near objects that obstruct the signal.

- When used with other wireless devices that emit the same 

frequency.

- When used in the vicinity of microwave ovens and other 

devices that emit a magnetic fi eld, electrostatic charge, or 
electromagnetic interference.

• 

A stable connection speed is required to play back streaming 
content. Use a wired LAN connection if the wireless LAN 
speed is unstable.

Use an ETHERNET cable to connect the LAN terminal 
on the TV to your broadcast router as shown below. 
This is recommended when enjoying services which 
require stable connection speeds, such as streaming 
media.

●

 Wired connection overview

 PC (Home Media Server)
 Router (commercially available)
 ETHERNET cable (commercially available)
 Network (Internet)

●

 How to connect

ETHERNET cable

1 Switch on the router (commercially available). Refer to 

the router’s operation manual for switching on. 

2 Connect the LAN terminal on the TV to the router 

(commercially available) with an ETHERNET cable 
(commercially available).

3 Go to Setup

→Multimedia/Network→Network 

→Networking.

4 Press OK and 

▲/▼ to select “wired”, and then 

press OK.

5 Select type of IP configuration:

Automatic:  Automatic configuration of the IP 

address via DHCP server or via multiple protocols 
according to UPnP specification.

Manual:  Enter your fixed static IP addresses 

manually. (Ask your internet service provider).

6 Press OK.

Use the SHARP (AN-WUD630) USB adapter with the 
TV. 

●

 Wireless connection overview 

 PC (Home Media Server)
 Wireless LAN router/access point
 Wireless AN-WUD630 LAN USB adapter
 Network (Internet)

• 

When using the SHARP wireless LAN adapter, try to provide 
as much free space around the device for best performance.

• 

Make sure the firewalls in your network allow access to the 
TV wireless connection.

To enjoy internet services, you need to connect the TV 
to a router with a high speed connection to the internet. 
You can also connect the TV to your Home network 
server through a router or access point.
The TV connection to the router can either be wired or 
wireless.

To access the TV internet confi 

guration go to 

→Multimedia/Network→Network settings→ 

Networking. The next screen is shown:

LAN

LAN

(Sold separately)